Sometimes, when you’re working on a car, you need to remove the locking lug nuts. And to do that, you need a key. Or, at least, you need the right key. But what if you don’t have the key? Or, worse yet, what if the key doesn’t fit the nut? Don’t worry—this blog post will teach you how to remove locking lug nuts with a key regardless of the situation. Just be prepared for a bit of effort and a lot of satisfaction when it’s all done.
What are Locking Lug Nuts?
Locking lug nuts are typically made of steel, with a hexagonal head and a socket on one end. The other end has a keyhole that fits over the bolt head. To remove the nut, the key is inserted into the keyhole and turned until it comes out the other side.
How to Remove Locking Lug Nuts With Key
If you’re having trouble removing locking lug nuts with a key, there’s a simple trick you can use. First, make sure the wheel is free from the hub. Use a wrench to loosen the lug nuts enough so you can twist them off. Then use a flathead screwdriver to pry up on the lip of the nut until it separates from the wheel. Finally, use your key to remove the nut.
What to do if Locking Lug Nuts Won’t Come Off
If the locking lug nuts won’t come off your wheel with a key, try using a wrench. Place the wrench around one of the lug nuts and turn it counterclockwise. If that doesn’t work, use a pry bar. Pry the pry bar under one of the lug nuts and twist it until it pops off.
Conclusion
Locking lug nuts can be a pain to remove, especially if you don’t have the key. If you find yourself stuck one day and need to remove a locking lug nut, follow these simple steps: 1) Use a socket wrench that is the correct size for the nut. 2) Loosen the bolt on the wheel that is attached to the nut with your socket wrench. 3) With your other hand, hold onto the wheel so it doesn’t fall off while you loosen the bolt on the wheel using your socket wrench. 4) Once you’ve loosened the bolt on the wheel, use your torque wrench to tighten it back up to its original specs.