Have you ever had to remove a dent from your bumper? If so, then you know that it’s not an easy task. Not only is it difficult to get the dent out, but it can also be costly to have it fixed. In this blog post, we will show you how to remove a dent from your bumper without any trouble at all.
Materials needed
To remove a dent from a bumper, you will need:
-A plunger
-Cordless drill
-1 inch hole saw
-Paint or a sealant
-Bumper screw(s)
-Wire brush
Procedure
If you have a dent on your bumper, there are a few steps you can take to remove it. The first step is to determine the size of the dent and whether or not it needs to be repaired. If the dent is small, your best bet is to try to remove it with a hairdryer. If the dent is larger, you will need to go ahead and repair it.
Tips to avoid damage
If you hit a dent in your bumper, don’t panic. Here are some tips to avoid damaging the car and yourself:
1. If the dent is small, try to push it out from the other side. If the dent is large, use a plunger or bucket to try to push it out from the inside.
2. If the dent is too big to remove with just one method, consider using a compressor to blow it out. Be sure to use protective gear, such as eye protection and a face shield.
3. If there is any paint damage, sand it down until it’s flush with the surface of the bumper and Primecoat or another quality sealant can be applied.