Opening hoods with broken cables is a common issue that consumers face. In most cases, this issue can be easily fixed by replacing the cable. However, in some cases, the cable may be too damaged to be fixed and will need to be replaced. In this article, we will discuss the different types of hoods and how to open them with a broken cable.
What You’ll Need
To open a hood with a broken cable, you will need:
-A hood release tool
-A cable cutter or shear
-A replacement cable
-A wire stripper or crimper
-Ruler or straight edge
-Hook knife
-Lubricant
How to Open Hood With Broken Cable
There are a couple of ways to open the hood of your car using a broken cable. The first is to use the emergency brake. Shimmy the emergency brake handle towards the front of the car, and pull it up. This should release the tension on the cables that hold up the hood. If this doesn’t work, you can try using a sharp object to pry open the hood. Pry it up from one side, then slide it across to the other side.
Conclusion
If you’re struggling to open your hood on your car because the cable is broken, there are a few things that you can do in order to fix the problem. You can try using a spanner or wrench to adjust the screws that hold the door shut, though this may not work if they have become stripped. Alternatively, you could replace the entire cable and door assembly – this is usually done by removing the front grille and then unbolting and replacing all of the parts.