If you live in a climate where the sun beats down on your windows all day, eventually they’re going to start peeling. Whether it’s because of the heat or the rain, window tint is a necessary evil. But what if you don’t want the tint to peel? What if you want it to last for years without any problems? There are a few things you can do to fix peeling window tint and keep your car looking great for years to come. In this article, we will outline some of the most common causes of window tint peeling and how to prevent them from happening in the first place.
What Causes Peeling Window Tint?
Window tinting is often a deciding factor between staying warm and spending money on heating. Unfortunately, window tint can also peel. Peeling window tint can be a sign of poor workmanship or improper installation. The following are some causes of peeling window tint:
1. Poor adhesive: If the adhesive that holds the tinting material to the window is not strong enough, the tint will start to peel off over time. This is most common with cheap window tints.
2. Excessive heat: If your home is kept very warm, the vinyl film may start to peel off from the surface of the glass due to heat stress. This typically happens when one part of the home is consistently hotter than another part, such as an attic that streams sunlight into a spare bedroom during winter months.
3. Wind and weather: Weather extremes like wind and rain can cause severe damage to window film, which then leads to peeling windows.
How to Fix Peeling Window Tint
Window tinting can be a great way to cut down on heat and glare in your home, but it can also be a source of peeling. If your window tint is starting to peel, there are several ways to repair or restore it.
The first step is to identify the source of the problem. Is the tint bubbling or cracking? Is it coming off in large chunks? If so, you may have a chemical reaction going on and need to replace the window film entirely. If the tinting is just starting to peel, you can try repairing it with tape or glue.
If you don’t want to go through the hassle of completely replacing the window film, you can try repairing it with tape or glue. Start by covering any areas that are peeling and cracks with tape. Make sure that the tape is tightly adhered to the surface, and then wait until the adhesive has dried before removing it. Glue can be used in a similar way, but should only be applied sparingly as too much will cause permanent damage.
What to Do If You Can’t Fix Peeling Window Tint
If you are experiencing peeling window tint, there are a few things you can do to address the issue. First, you may want to try using a window treatment adhesive to adhere the tint to the window. You can also try spraying a layer of sealant between the tint and the window glass. Finally, you may want to get a new window tint installation.
Conclusion
If you’re experiencing peeling window tint, there are a few things that you can do to try and fix the issue. First, test the tinting material to see if it is the culprit of the peeling. If it’s not the tinting material, then you may need to remove some of the adhesive that is holding down the plastic film. You can also try using a pressure washer on a low setting to dissolve some of the adhesive before trying to clean it off with soap and water. Finally, if all other measures fail and your window still shows signs of peeling, it may be time for a new window film installation!