If you’ve ever struggled with your sunroof, you know that it can be a frustrating experience. When it doesn’t open or close properly, it can be tough to get inside and do your errands. It may seem like a simple task, but fixing a sunroof is not as easy as you might think. In this article, we will share some tips on how to fix a sunroof that won’t open. From replacing the motor to fixing the linkage, we have you covered.
Causes of a Sunroof that Won’t Open
There are a few potential causes of a sunroof that won’t open, and each one requires a different solution. If the seal between the glass and the frame is faulty, you’ll need to replace the whole assembly. If there’s something blocking the sunroof from opening all the way, you may need to remove the obstruction and try again. Finally, if you can’t get the power window to work at all, it’s possible that there’s something obstructing the cable from reaching the motor. In any of these cases, it’ll be necessary to diagnose the issue and fix it accordingly.
Fixing a Sunroof That Won’t Open: Tools and Materials You’ll Need
If your sunroof won’t open, there are a few things you can do to try and fix it. The most common issue is a Misaligned Motor. Here are the tools and materials you’ll need:
Sunroof motor
Phillips head screwdriver
Wire cutters
Jigsaw or saw
Clothes hanger
Step 1: Disconnect the power from the sunroof motor by removing the screws that hold it in place. You may have to remove the cover too. Once it’s disconnected, unscrew the motor using a Phillips head screwdriver. Check for any obstructions inside the casing and clean them if necessary. Be sure to replace any old parts with new ones before reassembling everything.
Step 2: Measure the distance between two mounting points on either side of the sunroof opening and make a sketch or drawing of this with pencil on paper or on your computer screen. This will help when you’re installing your new motor. Make sure that your measurements match those that were drawn out in step one! If they don’t, you’ll need to adjust your mounting points accordingly before continuing.
Step 3: Cut two pieces of wire about 18 inches long and strip one end of each about an inch long. Twist each end around a clothes hanger so that one end is sticking out of one mounting point and the other end is sticking out of another mounting point on opposite side of opening (see picture).
Repairing a Sunroof That Won’t Open: The Procedure
If your sunroof won’t open, there are a few things you can do to try and fix the issue. First, make sure that the sunroof motor is working by trying to open and close it manually. If the motor is working, then your problem may be with the door or track assembly. To test the door or track assembly, remove it from the car and see if the sunroof opens when you put it back in place. If not, the assembly may need to be replaced. In some cases, where the sunroof hinge is broken or damaged, a new hinge may be necessary.
Tips for Avoiding a Sunroof that Won’t Open in the Future
If you are having trouble opening your sunroof, there are a few things you can do to try and fix the issue. First, check to see if there is anything blocking the sunroof from opening. If it seems like there is nothing blocking it, try using a putty knife to pry up on the seal around the edge of the window. If that doesn’t work, you may need to take your car into a shop for repairs.