Bell is a leader in the cycling industry, and their lines of helmets offer a wide range for all riding styles. But with so many helmets to choose from, how do you know what size helmet to buy? Here is our Bell Helmet Size Guide which will tell you everything you need to know about picking out the perfect helmet for your head.
How to Measure Your Head for a Proper Bell Fit
1. To measure your head for a proper Bell fit, start by wrapping a measuring tape around your head just above your eyebrows.
2. Make sure the tape is level all the way around your head, then take note of the measurement.
3. Compare your head circumference to the size chart on the Bell website to find the right size helmet for you.
4. If you’re between sizes on the chart, it’s usually best to go with the larger size.
5. Once you’ve found the right size helmet, you can adjust it to get a perfect fit. Start by adjusting the dial on the back of the helmet until it’s snug but not too tight.
6. Then, adjust the straps so they’re not too loose or too tight. The straps should sit just below your ears.
7. Finally, check to make sure that the helmet is level on your head. The front of the helmet should sit about an inch above your eyebrows.
What is a Bell Cycling Helmet?
A Bell cycling helmet is a helmet designed specifically for cyclists. It is different from a regular helmet in that it is much lighter and has better ventilation. A Bell cycling helmet also has a visor to protect the cyclist’s eyes from the sun.
The type of foam used in the padding depends on what level of protection is required. For example, higher end helmets will have an additional inner lining made from a soft material such as polystyrene to absorb impact while lower end models may only have interior padding made from EVA foam (as opposed to polystyrene), which offers less cushioning and a more rigid feel. The outer foam padding is often made from EVA foam as well and the inner lining is usually covered by a layer of soft material that makes cleaning easier, although this may be lost if the motorcycle helmet has to be replaced due to an accident.As previously mentioned, helmets are not all created equal and some may offer more protection than others depending on their design. Such helmets can cost thousands of dollars, but at least one thing is certain: Protecting your head against serious injury should never be taken lightly.
Why You Need a Bell Helmet
Wearing a helmet while riding a bike is important for many reasons. First, it helps protect your head in the event of a fall or collision. A helmet can help to prevent serious injury or even death. Second, it can help to keep you cool on hot days. The vents in a helmet help to keep your head cool and dry. Third, it can make you more visible to other cyclists and motorists. Wearing a bright colored helmet makes it easier for others to see you, especially in low-light conditions.
The Process of Sizing A Bell Helmet
1. To start, measure the circumference of your head just above your eyebrows with a tape measure – this will be your helmet size. If you’re between sizes, choose the smaller size.
2. Once you have your helmet size, try on a few different models before making your final decision. The fit of the helmet is very important – it should be snug but not too tight.
3. Adjust the straps and padding of the helmet until it feels comfortable and secure on your head. Make sure that you can see clearly out of the visor and that it is not blocking your vision in any way.
4. Once you’ve found a helmet that fits well and is comfortable, make sure to buy one in the right color and style for you. Bell makes a variety of helmets in different colors and designs, so there’s sure to be one that’s perfect for you.
What To Consider When Buying A Bell Cycling Helmet
There are a few things to keep in mind when purchasing a Bell cycling helmet. Firstly, consider what type of riding you will be doing. If you will be doing a lot of off-road riding, then you will need a different helmet than if you are mostly going to be riding on the road. Secondly, think about what kind of climate you will be riding in. If you live in a warm climate, then you will need a helmet with good ventilation. Thirdly, make sure to try on the helmet before you buy it. Every person’s head is a different size and shape, so it is important to make sure that the helmet fits well. Once you have considered all of these factors, you will be able to narrow down your choices and find the perfect Bell cycling helmet for you.
How Are Bell Helmets Designed?
The design of a Bell helmet is based on the same principals as motorcycle helmets. A Bell cycling helmet will have a hard shell that completely encases the head with no gaps so that there is no opportunity for the head to be injured. In addition, it will also have foam padding in critical areas that offer additional protection and comfort during use.
How to Fit a Bell Helmet
1. To find the right size helmet, start by measuring your head circumference. Use a tape measure to wrap around your head just above your eyebrows. If you don’t have a tape measure, you can use a string or ribbon and then measure the length with a ruler.
2. Once you have your head circumference, consult the size chart for the specific helmet you’re interested in. Bell helmets are available in sizes XS through XXL.
3. If you’re between two sizes on the chart, it’s usually best to go with the larger size. This is because it’s easier to adjust a helmet that’s too big than one that’s too small.
4. Once you’ve selected the right size helmet, it’s time to adjust the straps for a comfortable fit. Start by adjusting the chin strap so that it’s snug but not too tight. Then, adjust the side straps so that they sit just below your ears. Finally, adjust the rear strap so that it sits at the base of your skull.
What is the Best Recommended Model of Bell Cycling Helmet?
BELL Bike-Helmets Passage Adult Bike Helmet
The BELL Bike-Helmets Passage Adult Bike Helmet is a great choice for anyone looking for a reliable and stylish bike helmet. This helmet features a sleek design with plenty of vents to keep you cool while riding. It also has an adjustable fit system so you can get the perfect fit every time. Plus, the built-in visor helps to keep the sun out of your eyes. The BELL Bike-Helmets Passage Adult Bike Helmet is a great choice for any recreational rider or commuter.
Double Check on the Size and Shape of the Bell Helmet To Ensure Purchase
People should always double check on the size and shape of the Bell Helmet before they buy it. There are three main types of shapes for helmets which are determined by head measurements: oval, round, and intermediate. People can measure their head by using a cloth tape measure and wrapping it around the widest part of their head, about one inch above their eyebrows. The number given in inches or centimeters is your head circumference measurement. Once people have their head circumference measurement, they can use the Bell Helmet Sizing Guide in order to find out what size helmet they need to buy. The sizes available for Bell Helmets are Small (up to 22.44 inches or 57 centimeters), Medium (22.83 to 23.62 inches or 58 to 60 centimeters), Large (23.62 to 24.41 inches or 60 to 62 centimeters), and X-Large (24.8 to 25.59 inches or 63 to 65 centimeters).
After determining what size of helmet is needed, the next step is finding the right shape. Oval-shaped heads are longer front-to-back than they are side-to-side, while round-shaped heads are nearly as wide as they are long. Intermediate shapes fall somewhere in between oval and round.
Evaluate the Chin Strap and Buckles On The Helmet
When you are looking for a Bell cycling helmet, it is important to find one that fits properly. The first step in finding the right size is to evaluate the chin strap and buckles on the helmet. The chin strap should be adjusted so that it is snug but not too tight. The buckles should be easy to use and should stay securely fastened when you are wearing the helmet.
The next step is to measure your head. You will need to use a tape measure to find the circumference of your head just above your eyebrows. Once you have your measurement, you can consult the size chart for Bell helmets to find the right size.
It is also important to try on the helmet before you buy it. Make sure that the helmet is comfortable and does not slip when you move your head. The straps should also be adjustable so that you can get a snug fit.
By following these steps, you can be sure to find a Bell cycling helmet that fits properly and provides the protection you need.
How to Measure Yourself
To find the right size Bell cycling helmet, you will need to take some measurements of your head. First, use a tape measure to find the circumference of your head just above your eyebrows. Next, measure the distance from your forehead to the back of your head. Finally, measure the distance from one side of your head to the other.
Once you have these measurements, you can use the Bell Cycling Helmet Sizing Guide to find the right size helmet for you. Simply find the measurement that is closest to yours in the guide and that will be your helmet size.
If you are between two sizes, it is usually best to choose the larger size. This will ensure that your helmet fits comfortably and does not slip off while you are riding.
Now that you know how to measure yourself for a Bell cycling helmet, it will be easy to find the right size helmet for you. Just follow the steps in this guide and you will be on your way to a comfortable and safe ride.
The Importance of Fit
A proper fitting bicycle helmet is essential for safety while riding. A helmet that is too large or small can actually be more dangerous than not wearing a helmet at all. That’s why it’s so important to take the time to find a helmet that fits you properly. Fitting the helmet properly will reduce the risk of injuries to your head and brain in any kind of bicycle accident. Helmet Standards. The U.S. Consumer Product Safety Commission (CPSC) is responsible for passing and enforcing regulations on bicycle helmets to keep riders safe. To be legally sold, a helmet must meet the CPSC’s safety standards for impact protection and the strap strength. If a helmet does not meet these standards, it cannot be sold in the United States – including online or at bike shops that import from overseas manufacturers.
The Bicycle Helmet Safety Institute (BHSI) also has strict safety criteria for bicycle helmets as well as a certification program to provide consumers with information about which helmets have been tested.
What Measurements To Take
To find the right size Bell cycling helmet, you will need to take a few measurements. First, measure the circumference of your head just above your eyebrows. Second, measure the distance from your forehead to the back of your head. Once you have these measurements, you can consult the Bell sizing chart to find the right size helmet for you.
If you are between sizes on the Bell sizing chart, it is best to choose the larger size. You can always adjust the helmet to make it tighter if needed. But if you choose a helmet that is too small, it will be uncomfortable and may not provide adequate protection in the event of a crash. If you have long hair, it is best to put your hair up into a bun or ponytail before putting on your helmet. This will prevent the straps from pulling and the back of your head from being uncomfortable when you ride.When buying a Bell recycling helmet, it is important to find one that fits snugly around your head and that does not move about when riding.
Mismatched Helmet Sizes
Mismatched helmet sizes are one of the most common mistakes made when choosing a cycling helmet. A properly sized helmet should fit snugly and be level on your head, covering your forehead. If the helmet is too large, it will rock back and forth and provide little protection in the event of a fall. If the helmet is too small, it will be uncomfortable and may not stay in place during a fall.
The best way to avoid mismatched helmet sizes is to try the helmet on before you buy it. If you can’t try the helmet on, make sure to measure your head and consult the size chart provided by the manufacturer.
1. Wearing a Helmet That’s Too Large
Wearing a helmet that’s too large is just as bad as wearing one that’s too small. A large helmet will rock back and forth and provide little protection in the event of a fall. It will also be uncomfortable and may not stay in place during a fall.
2. Wearing a Helmet That’s Too Small
Wearing a helmet that’s too small is also dangerous. A small helmet will be uncomfortable and may not stay in place during a fall. It will also provide little protection in the event of a collision.
3. Wearing a Helmet That’s Obscured
By Hair is pretty, but it shouldn’t hide your helmet. Too much hair in the way of a helmet reduces its effectiveness and can be dangerous if a serious fall occurs. Long hair should be tied back to provide full head and neck protection.
4. Failing To Adjust The Straps Properly
All helmets have straps for a reason! Straps are designed to keep your helmet securely affixed to your head and minimize the chance of it slipping off during a fall or collision. All helmets come with an adjustable chin strap that must be properly tightened before use and throughout the day as necessary.
5. Not Visiting A Skate Shop
Regular visits to your local skate shop will keep your helmet in top condition. Your local retail store will be able to inspect your helmet regularly and help you determine whether or not you need to replace it.Your local skate shop is also a great place to ask questions about helmets, learn more about their proper use, and find out what the best models are for particular skating activities. If possible, try out different brands and models until you find one that feels comfortable and works well for you!
Adjustment Points of Bell Cycling Helmet
There are three main adjustment points on a Bell cycling helmet: the straps, the dial, and the chin bar. The straps go around your head and under your chin. The dial is located at the back of the helmet, and it is used to tighten or loosen the fit of the helmet. The chin bar is located at the front of the helmet and it can be lifted up or down to adjust the fit.
To find the right size for your head, start by measuring your head circumference. Once you have your head measurement, consult Bell’s sizing chart to find the right size helmet for you. If you are between sizes, it is usually best to choose the larger size.
Once you have found the right size helmet, adjust the straps so that they are snug but not too tight. Then, adjust the dial to get a snug but comfortable fit. Finally, adjust the chin bar so that it fits snugly under your chin.
Deciphering Sizing Parts of Bell Cycling Helmet
Bell cycling helmets come in a variety of sizes. To find the right size helmet for you, it is important to understand the different parts of the helmet that affect sizing.
The first part of the helmet that affects sizing is the shell. The shell is the outermost part of the helmet and comes in three different sizes: small, medium, and large. The size of the shell should match the size of your head. If you are unsure of your head size, you can measure it with a tape measure.
The next part of the helmet that affects sizing is the padding. The padding is located inside the helmet and helps to cushion your head in the event of a fall. The padding comes in four different sizes: small, medium, large, and extra-large. The size of the padding should be based on the size of your head and how much room you need for comfort.
The last part of the helmet that affects sizing is the chin strap. The chin strap helps to keep the helmet securely on your head in the event of a fall. The chin strap comes in two different sizes: standard and XL. The size of the chin strap should be based on your comfort. The standard chin strap will work for most people. You can determine the size of the chin strap by how comfortable it is when you fasten it and secure it to your helmet.The first thing you should do to find a good fit for your helmet is take a measurement of your head size. To do this, pass a tape measure around your head about one-inch above your ears, making sure that the tape measure fits snugly but not too tight. Your head size is the number where the tape measure ends after completing the circle around your head once.
How to Find the Right Size Helmet
Choosing the right sized helmet is important for both comfort and safety while cycling. Here are some tips on how to find the right size helmet:
1. First, measure the circumference of your head just above your eyebrows. Use a flexible tape measure or string, and then measure the length with a ruler.
2. Next, consult a sizing chart to find the helmet size that corresponds to your head measurement. Every brand has slightly different sizing, so it’s important to consult a sizing chart specific to the brand of helmet you’re interested in.
3. Once you’ve found the right size using the sizing chart, it’s important to try the helmet on to make sure it’s comfortable and fits well. Adjust the straps and pads until the helmet feels snug and secure on your head.
4. Finally, once you’ve found a comfortable and well-fitting helmet, make sure to read the instructions carefully so that you know how to properly care for and maintain your new helmet.
5 Tips for Picking the Best Bell Cycling Helmet
When it comes to cycling helmets, size does matter. A properly sized helmet will be more comfortable and provide better protection in the event of a crash.
The first step is to measure your head circumference. Use a tape measure or string to measure the widest part of your head, about an inch above your eyebrows. Once you have your measurement, consult a size chart to find the right helmet size.
Next, try on the helmet. The straps should be tightened so that the helmet fits snugly but isn’t too tight. The helmet should sit level on your head and shouldn’t rock back and forth.
Once you’ve found a helmet that fits well, adjust the straps so that they are comfortable but not too loose. The front strap should sit just below your chin, and the rear strap should sit along the back of your head.
Finally, check to make sure that the helmet’s visor is in line with your eyes. This will help to protect your eyes from debris and sun glare while you are riding.
Bell Cycling Helmet Sizing Guide: 7 Steps To Finding The Right Size
Step 1: Determine Your Head Size
To find your head size, use a flexible measuring tape. Position the tape about 1 inch above your eyebrows and wrap around your head, keeping the tape level all the way around. Make sure not to pull the tape too tight—you should be able to fit one finger between the tape and your head.
If you don’t have a flexible measuring tape, you can use a string or a piece of ribbon. Once you have wrapped it around your head, mark the spot where the ends meet and then measure the distance with a ruler.
Once you have your head measurement, consult Bell’s sizing chart to find the right helmet size for you.
Bell Cycling Helmet Sizing Chart:
Head Circumference (in inches) Helmet Size
20 – 21 S
21 – 22 M
22 – 23 L
23 – 24 XL
24 – 25 XXL
25 and up XXXL
2.Wearing the Helmet
You know you’re wearing your helmet correctly if you can look straight ahead and see the front rim of the helmet in a mirror. The helmet should sit level on your head—if it slopes back, you may need to tighten the fit with the adjuster (see step 3 below) or use a larger size helmet. When securing your helmet, be sure to check all straps for proper fit and that none are loose. Keep in mind that helmets should be worn snugly so that they do not move around while riding.
Step 2: Measure Your Head
To find your helmet size, use a flexible measuring tape to measure the circumference of your head just above your eyebrows. If you don’t have a flexible measuring tape, you can use a string or ribbon and then measure the string or ribbon with a straight ruler.
Once you have your measurement, consult the size chart for your specific helmet model to find the right size.
If you are between two sizes, it is usually better to go with the larger size. You can always add padding to a helmet that is too big, but you can’t do anything about a helmet that is too small.
Now that you know how to measure for your Bell cycling helmet, it’s time to start shopping for the perfect one!
Step 3: Adjusting Your Bell Cycling Helmet
Now that you have your head circumference measurement, it’s time to choose the right size helmet. Bell offers helmets in Small, Medium, and Large sizes.
If your head circumference measurement falls in between two sizes, it’s best to choose the larger size. You can always adjust the straps and pads to get a snug fit.
Once you have your helmet, it’s time to adjust the straps and pads to get a comfortable, snug fit. Here are some tips:
– Adjust the sliders on the straps so they sit just below your earlobes.
– The Y-shaped strap should form a ‘Y’ shape just below your earlobes.
– The front strap should sit about an inch away from your eyebrows.
– The chin strap should be tight enough that you can only fit one finger between the strap and your chin.
– The helmet should not be able to move around on your head when properly adjusted.
– If you are still having trouble getting a comfortable fit, try adjusting the pads that come with the helmet.
Step 4: Find The Least Comfortable Helmet That Fits You
Now that you’ve got a range of sizes that could work for you, it’s time to find the least comfortable helmet that fits you. You want the helmet to be tight enough that it doesn’t move around on your head when you ride, but not so tight that it’s uncomfortable or causes headaches.
The best way to do this is to go to a local bike shop and try on different helmets in your size range. Pay attention to how each helmet feels on your head and whether it seems too loose or too tight.
Once you’ve found a helmet that feels good, make sure to adjust the straps so that they’re snug but not too tight. You should be able to fit two fingers between the strap and your chin.
And that’s it! Now you know how to find the right size cycling helmet for your head.
Step 5: Evaluate the Length of the Strap that Goes Around Your Neck
The strap that goes around your neck should be comfortable and not too tight. You should be able to adjust it so that it is snug but not too tight. The helmet should also have a chin strap that you can adjust.
Make sure that the helmet is not too loose or too tight. You should be able to fit two fingers between the strap and your chin. The helmet should sit level on your head and not rock back and forth.
If the helmet is too loose, it will not provide adequate protection in case of an accident. If the helmet is too tight, it will be uncomfortable to wear.
Once you have found a helmet that fits well, make sure to adjust the straps so that they are snug but not too tight. You should also check to see if the helmet has a retention system. This system will help to keep the helmet in place in case of an accident.
Step 6: Push or Tap against the front of the helmet to check for room for you to breath and rotate your head
Pushing or tapping the front of the helmet should not cause the helmet to move too much. If you have to push hard to get the helmet to budge, it’s likely too big.
You should also be able to rotate your head while wearing the helmet. If the helmet is too tight, it will be difficult to turn your head. This could be dangerous if you’re riding a bike and need to look over your shoulder for traffic.
If you can push or tap the front of the helmet and rotate your head without any problems, then you’ve found a good fit!
Step 7: Check for a Snug but Comfortable Fit on Your Forehead
The last thing you want is for your helmet to be too loose and not provide adequate protection in the event of an accident. Likewise, you don’t want it to be so tight that it’s uncomfortable to wear.
A good rule of thumb is to place your thumb on the inside of the helmet, about an inch above your eyebrow. If you can fit more than two fingers between the helmet and your forehead, it’s too loose.
Once you’ve adjusted the straps so that the helmet is snug but not too tight, rotate it front to back and side to side. It should stay in place and not move around on your head.
Conclusion
With so many different brands and styles of helmets on the market, it can be difficult to know how to choose the right one. Our bell cycling helmet sizing guide takes the guesswork out of choosing a helmet that will fit you properly and keep you safe on the road. By following our simple steps, you can be sure that you’ll find a helmet that fits comfortably and provides the protection you need while you’re riding.