It’s that time of year again: the season of car maintenance. Whether it’s an oil change, tire rotation, or even a full-blown tune-up, there are plenty of tasks that need to be performed on your ride in order to keep it running like new. But how do you go about rescheduling all these necessary repairs when you don’t have the time or money to do them all at once? Here are four tips for rescheduling car maintenance without losing too much sleep: 1. Make a plan: Figure out what needs to be done and when. This is the most important step, because if you don’t have a plan, you’ll likely end up doing things in a haphazard way that will cause more damage. 2. Get organized: Create an organized system for tracking your car’s repairs so you know exactly where you stand and when each task is due. This way, you can avoid any last-minute crises and keep your car on the road as smoothly as possible. 3. Set realistic deadlines: Don’t try to push yourself beyond your comfort zone; instead, set reasonable goals that
How to Reset a Car After an Oil Change
If your car is having trouble starting after getting an oil change, there is a simple fix. Resetting the car will clear any potential problems with the ignition, fuel system, and emissions.
Tools You’ll Need
If you have a vehicle that requires an oil change, be sure to bring the following items with you to the service station:
-New oil filter
-New synthetic motor oil
-New car battery
-New spark plugs
-New air filter
-New cabin air filter
-Torque wrench <75 ft/lbs> -Flathead screwdriver <8in. length> -Phillips head screwdriver <#2 Phillips head> -High speed internet connection If your engine has a timing belt, it will also need to be replaced at around 100,000 miles and should be inspected by a mechanic. Additionally, when replacing your airbag inflator assembly or power steering pump, it is important to note that these parts are not covered under warranty and therefore should be replaced by the owner/purchaser.
How to Perform the Reset
If your car has a Check Engine Light, it means that there is an issue with the engine. You can reset the car by following these steps:
1. Park your car in a safe place.
2. Turn off the ignition and remove the key from the ignition.
3. Open the hood of your car.
4. Remove any screws that are holding the air conditioning unit or other parts of the hood on.
5. Lift up the bonnet and disconnect the negative battery cable.
6. Disconnect all connectors from inside of the car, such as those for climate control, power windows, etc.
7. Bend over backwards so you are looking down into your engine bay and use a screwdriver to unscrew all eight spark plug boots (two per cylinder) Note: Make sure each boot is unscrewed before replacing it on its spark plug! Once all eight spark plug boots have been unscrewed, gently pull them out of the cylinders (be careful not to lose any screws). If you do lose a screw, just replace it and keep going! 8 . Hold each spark plug boot in one hand and using a socket wrench, remove the spark plugs from their threads (be careful not to strip them!) 9 . Replace all of the spark plugs by inserting them into their corresponding sockets and tightening them down with a ratchet/wrench combination 10 . Reinstall all screws and connectors above and below where you removed
Conclusion
If you’ve just had your car serviced, congratulations! It’s now time to take care of the little things that will keep it running smoothly for years to come. One of these tasks is resetting the car after an oil change. Here are five steps to help make this process as easy and stress-free as possible: 1. Check all fluids levels and top them off as necessary 2. Replace air filters and wiper blades if needed 3. Reset the parking brake if desired 4. Connect your charging cable if you have one 5. Turn on all lights and appliances that use electricity