If your car or any other electronic device is having trouble starting up, it may be because of a malfunctioning body control module. This is a common issue that can be resolved by following a few simple steps. In this article, we will outline the symptoms and solutions for resetting body control modules. We will also provide a step-by-step guide on how to perform the repair yourself if necessary. ###
What is the Body Control Module?
The body control module (BCM) is a computer that helps the vehicle’s electronics communicate with each other. If it fails, the car may not start, or might have other problems. Here’s how to reset it:
1. Disable the car’s security system by pressing and holding the power button for several seconds until you see the “Access” sign in the instrument panel turn green.
2. Open the door and remove any removable debris or obstructions from under the car.
3. Disconnect all of the car’s electrical connectors, including both battery cables and ground cables.
4. Detach both upper and lower front fascia panels (see photo). Underneath each panel are two screws that hold it in place; remove them carefully so you don’t damage anything else. Be sure to replace these panels when you’re done!
5. Locate and remove the BCM-covered black box (see image). It should be attached to one of the chassis members near where one of the front fascia panels was previously located. Pry off its cover using a small flathead screwdriver, then disconnect its ribbon cable from beneath it (+/-12V, 5V, AUX). Leave its power cord connected for now… we’ll need it later on!
6. Locate and remove two Torx T5 screws from beneath the BCM-covered black box assembly (+/-12V, 5V, AUX). Once
How to Reset Body Control Module
If your car is having trouble starting, there’s a good chance the body control module (BCM) is at fault. This electronic device controls all of the car’s functions, from the ignition to the airbags. If the BCM goes bad, it can cause the car to not start or to stall out while driving. Here’s how to reset your BCM:
First, make sure you have a complete understanding of what’s wrong with your car and that you have all of the necessary tools and parts. If you don’t have all of these things, you may need to wait until you do before attempting this procedure.
Next, remove the battery cover on the underside of your car. On some models, you may need to remove several screws in order to get access. Once you have access, disconnect both cables connected to the BCM. Don’t forget to label them so that you can reconnect them in reverse order when you’re finished!
Now it’s time for some tricky surgery! You’ll need a Phillips head screwdriver and a spark plug socket wrench in order to remove the BCM from its socket on-board your car. Make sure that everything is unplugged before beginning this process – we don’t want any electrical sparks flying around! After loosening all of the screws, gently pull out on the BCM – be careful not to scratch it! Once it’s out of its
What are the Symptoms of a Bad Body Control Module?
If your car has a body control module (BCM), it can malfunction and cause various problems. When the BCM malfunctions, the car may not start, shift properly, or even roll-over. In some cases, the BCM may also cause the car to feel like it’s in overdrive or lose power when you try to accelerate.
If you’re experiencing any of these symptoms, it’s important to fix the BCM as soon as possible. Here are three ways to do that:
1. Reset The BCM With A Reset Code
The first way to reset the BCM is to use a reset code. To do this, you’ll need to call your car dealership and ask for their help. They will then give you a reset code that you need to enter into the BCM. Once you’ve entered the reset code, the BCM should reset and your issues should resolve themselves.
2. Remove The Batttery And Connect It To A Charger For 10 Minutes
If your car doesn’t have a reset code or if it’s not possible to get one, you may be able to fix your issue by removing the battery and connecting it to a charger for 10 minutes. This process will shock the BCM and hopefully fix whatever is wrong with it.
3. Replace The BCM If Necessary
In some cases, replacing the BCM is necessary in order to get your car back up and running
How to Repair or Replace a Body Control Module
If your car is having problems starting, you may need to repair or replace the body control module. This article will teach you how to do both repairs.
Conclusion
If you’re experiencing problems with your car, there’s a good chance you’ve tried resetting the body control module. Unfortunately, this usually doesn’t work and you have to take your car in for service. In this article, we’ll show you how to reset the body control module yourself without having to take your car in for service. By following these simple steps, you can get your car back up and running as quickly as possible.