If you have a Dodge Charger, you may be wondering how to program the key fob. It’s actually quite simple and only takes a few minutes. Here’s what you need to do:
1. Sit in the driver’s seat and close all doors.
2. Insert the key into the ignition and turn it to the “On” position without starting the engine.
3. Press and release the “Lock” button on the key fob once.
You should see a red light on the dash board that indicates the system is ready to learn your new key fob signal. If you don’t see this light, repeat step 2.
4. Within five seconds, press and hold down the “Lock” button on your new key fob for at least three seconds until you hear a chirp sound coming from outside of the vehicle indicating that programming was successful.
- First, find the small black button on the back of your key fob
- Press and hold the button for a few seconds until the LED light on the front of the key fob begins flashing
- Next, use a paperclip or a similar object to press and hold the “learn” button on your Dodge Charger’s dashboards for around five seconds
- The “learn” button is usually located near where you insert your key into the ignition
- While still holding down both buttons, press and release each of the four buttons on your key fob in quick succession
- You should hear a beeping sound from your car after each button press indicating that it has learned that particular remote signal
- 5 Repeat this process for any additional key fobs that you wish to program to your vehicle
Credit: www.keylessentryremotefob.com
Can You Program a Dodge Charger Key Fob Yourself?
If you have a Dodge Charger key fob that needs to be programmed, you may be able to do it yourself. Here’s what you need to know.
Your Dodge Charger key fob sends a signal to your car that allows it to start.
It also allows you to lock and unlock your doors and trunk. The key fob battery may die eventually, which will prevent the key fob from working. When this happens, you’ll need to program a new key fob for your Charger.
Here’s how to program a Dodge Charger key fob:
1. Sit in the driver’s seat and close all doors.
2. Insert the key into the ignition and turn it to the “On” position without starting the engine.
3. Press and release the “Lock” button on the first remote control transmitter twice within five seconds. You should hear two chirps indicating that programming mode has been activated successfully. If not, repeat step two and try again.
4-Press any button on second remote control transmitter once within 20 seconds of completing step three . You should hear one chirp indicating successful programming of that particular transmitter button . If not , press any button on the first remote again (within five seconds) then try pressing a button on the second remote (within 20 seconds).
How Do You Program a Dodge Key Fob Without a Working One?
If you have a Dodge key fob that is not working, you may be able to program it without a working one. You will need to have two working keys for this process. If you only have one working key, you will need to contact a locksmith or dealership for assistance.
To program a Dodge key fob without a working one, start by inserting the first working key into the ignition and turning it to the “On” position. Then, press and release the “Lock” button on the first key fob. Next, insert the second working key into the ignition and turn it to the “On” position within five seconds of pressing the “Lock” button on the first key fob.
Once both keys are in the “On” position, press and hold down the “Unlock” button on each key fob for at least two seconds. After two seconds have passed, press and release either button again and then remove both keys from the ignition. Your Dodge key fobs should now be programmed!
How Do You Program a Key Fob for a 2008 Dodge Charger?
In order to program a key fob for a 2008 Dodge Charger, you will need to have two working keys. If you only have one, you will need to get a second key made before proceeding. Once you have two keys, follow these steps:
1. Insert the first key into the ignition and turn it to the “On” position without starting the engine.
2. Within five seconds, insert the second key into the ignition and turn it to the “On” position as well.
3. Within 10 seconds of having both keys in the “On” position, press and release the gas pedal three times.
4. Turn off both keys and remove them from the ignition within 30 seconds of completing step 3.
5. Press and hold down the unlock button on one of your key fobs for approximately two seconds. You should then see all four doors unlock, indicating that your new key fob has been successfully programmed!
How Do I Program My Dodge Key Fob With a Push Button Start?
Assuming you have a key fob with push-button start:
To program your Dodge key fob with push button start, first locate the Start/Stop button on your dash. Then, press and hold the Start/Stop button for 5 seconds.
Next, press and release the Start/Stop button 2 times. Finally, press and hold the Start/Stop button for 5 seconds. Your Dodge key fob should now be programmed!
Dodge charger new key fob programming 08-10
How to Start Dodge Charger Without Key Fob
Assuming you don’t have a spare key fob, there are still a few ways you can start your Dodge Charger without one. If your Charger has push-button start, you can use the emergency key blade to start it. If your Charger doesn’t have push-button start, then you’ll need to use the traditional method of starting it with a physical key.
If your Dodge Charger has push-button start, the emergency key blade will be located in the fob. To start your car without the fob, simply insert the key into the slot on the steering column and turn it to the “On” position. Then, press and hold the button on the center stack until the engine starts.
If your Dodge Charger doesn’t have push-button start, then you’ll need to use the physical key to start it. Insert the key into the ignition and turn it to the “On” position.
Conclusion
If you own a Dodge Charger, you may be wondering how to program the key fob. The process is actually quite simple and can be done in just a few minutes. Here’s what you need to do:
1. Sit in your car with the doors closed and the ignition off.
2. Press and hold the “Lock” button on your key fob for about three seconds.
3. Press and release the “Unlock” button on your key fob.
4. Repeat steps two and three until you hear a chime or see the turn signal lights flash, indicating that the key fob has been successfully programmed.